Other material
GB/T 5169.17 Fire hazard testing for electric and electronic products
GB/T 5169.17 Fire hazard testing for electric and electronic products – Standard
GB/T 5169.17 Fire hazard testing for electric and electronic products, Part 17: Test flames-500 W flame test method
GB/T 5169.17 Fire hazard testing for electric and electronic products – Scope
This part of GB/T 5169 describes a test method consisting of two small-scale laboratory test procedures which is intended to compare the burning behaviour of different materials used in electrotechnical products. Vertically oriented bar specimens or horizontally oriented plate test specimens are exposed to a small flame ignition source with a nominal thermal power of 500W. The test method uses two test specimen configurations to classify material performance. Rectangular bar-shaped test specimens are used to assess ignitability an burning behaviour, and square plate test specimens are used to assess the resistance of the test specimen to burn-through, as defined in 8.3.3. This test method only applies to materials that have been classified as V-O or V-1 according to IEC 60695-11-10
This test method is only applicable to solid and cellular materials that have an apparent density of more than 250 kg/m3, determined in accordance with ISO 845. The method does not apply to materials that shrink away from the applied flame without igniting due to their thinness.
GB/T 5169.17 Fire hazard testing for electric and electronic products – Relative Standard
GB/T 5169.1 Fire hazard testing for electric and eletronic products—Part 1:Terminology concerning fire tests
ISO 291 Plastics-Standard atmospheres for conditioning and testing
ISO 293 Plastics-Compression moulding of test specimens of thermoplastic materials
ISO 294 Plastics - Injection moulding of test specimens of thermoplastic materials
ISO 295 Plastics-Compression moulding of test specimens of thermosetting materials
ISO 845 Cellular plastics and rubbers-Determination of apparent density
ISO 13943 Fire Safety-Vocabulary
ISO 16012 Plastics-Determination of linear dimensions of test specimens
IEC 60695-11-3 Fire hazard testing-Part 11-3: Test flames-500 W flames-Apparatus and confirmational test methods
IEC 60695-11-10 Fire hazard testing – Part 11-10：Test flame – 50W horizontal and vertical flame test methods
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------